E1524/E1810
Converter ID:
171
Vendor:
IKEA
Description:
IKEA TRADFRI Remote control
States:
battery action linkquality
Zigbee models:
IKEA of Sweden / TRADFRI remote control
Pairing notes:

Pairing Pair the remote to Zigbee2MQTT by holding it close to the coordinator and pressing the inside button, next to the CR2032 battery, 4 times. The red light on the (front of the) remote will now flash a few times.

Notes:

Exposes Battery (numeric) Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum) Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: arrow_left_click, arrow_left_hold, arrow_left_release, arrow_right_click, arrow_right_hold, arrow_right_release, brightness_down_click, brightness_down_hold, brightness_down_release, brightness_up_click, brightness_up_hold, brightness_up_release, toggle.

Linkquality (numeric) Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.